1M3 SELF LOADING CONCRETE MIXER
1M3 SELF LOADING CONCRETE MIXER
The JZR500 Diesel Skip-Hoist Concrete Mixer is a highly efficient, heavy-duty site mixer engineered for contractors who need self-contained aggregate loading capabilities in a compact, towable package. This 0.5m3 output machine is ideal for small-to-medium residential builds, rural infrastructure projects, and concrete pouring in remote areas where 3-phase electrical grid power is unavailable.
As clearly shown in the image, the machine is built on a rigid, towable site chassis equipped with a front tow hitch and heavy-duty pneumatic tires for easy repositioning. To operate, the four integrated steel stabilizer legs are extended down to lift the tires off the ground, creating a completely stable, level mixing station.
The machine operates via a mechanical skip-hoist system: raw aggregates are shoveled into the ground-level hopper visible at the rear; a heavy-duty cable-and-pulley winch system then lifts the skip up the vertical steel tracks, tipping the raw material directly into the double-cone mixing drum. Driven by a dependable, radiator-cooled single or multi-cylinder diesel engine housed beneath the frame, the bi-cone drum rotates clockwise to mix the concrete thoroughly and counter-clockwise to cleanly discharge a fresh 0.5m3 batch into wheelbarrows or a concrete pump hopper.
Technical Specifications
Equipment Component | Parameter / Specification Metric Details |
Model Class Designation | JZR500 Series (Skip-Hoist / Hydraulic Winch Variant) |
Power Type / Prime Mover | Single-Cylinder or Dual-Cylinder Water-Cooled Diesel Engine |
Engine Rated Power Output | 15 hp to 22 hp (11 kW to 16.2 kW) @ 2,200 RPM |
Starting System Architecture | 12V Electric Key Start with auxiliary manual crank backup |
Net Concrete Yield Output | 0.5 cubic meters (500 Liters / 0.65yd) per fully mixed batch |
Gross Drum Charging Capacity | 800 Liters (Dry raw material unmixed volume) |
Average Hourly Production Rate | 18 to 22 m3 23.5 to 28.7yd3 continuous batching |
Drum Mixing Drive Assembly | Heavy-duty ring-gear perimeter drive or rubber friction roller guide |
Discharge Mechanism | Reversing Bi-Cone Drum (Clockwise to mix / Counter-clockwise to discharge) |
Skip Hopper Lifting Drive | Mechanical or hydraulic winch clutch with heavy dual-steel wire cables |
Skip Hopper Ascent Time | Approx. 5 to 7 seconds from ground level to drum drop-in angle |
Water Supply Dosing Unit | Integrated 12V/24V self-priming suction pump with timed volume dial |
Chassis Stability Hardware | timeS Manual slide-down square steel stabilizer drop-legs |
Mobility & Towing Gear | Dual 14-inch or 15-inch pneumatic site tires with a rigid tongue-and-ring tow bar |
Estimated Empty Machine Weight | ~4,410 lbs to 4,850 lbs (2,000 kg to 2,200 kg) |
Operational Footprint Dimensions | Approx. 9.8 ft Long time7.2 ft Wide times 9.5 ft High (Skip lowered) |
Fuel Tank Capacity | ~5.3 Gallons (20 Liters) integrated engine fuel cell |
